Home | Register | Log In
ČeskyEnglish
CZKEUR
+420 774 77 66 11
Shipping & Returns Privacy Notice Conditions of Use Contact Us
Home :: COMET System :: Data loggers - Uxxxx series :: GSM modem wireless logger :: COMET Logger U7844M - Four channel GSM data logger with pulse and two-state inputs with built-in modem

COMET Logger U7844M - Four channel GSM data logger with pulse and two-state inputs with built-in modem

Model: CO_U7844M
Manufactured by: COMET System
Price was:15609 Kč
Sale price:14829 Kč incl. VAT
12255 Kč excl. VAT
Save: 5% off
  Add to Cart:

not rated yet Averige rating 0 from 5 stars

Show/write reviews


U7844M - Four channel GSM data logger with pulse and two-state inputs with built-in modem
This model includes four inputs. Two of them can function as counters, and all four inputs can function as binary inputs. Both counter and binary inputs serve to monitor voltage signals or signals coming from a voltage-free contact. The binary input changes are registered immediately, irrespectively of the recording interval setting. To safe record the input status, the signal must be present for at least 1 s. Unlike the U0843M model, binary inputs can capture connected/disconnected voltage status. The counter states are recorded according to the set Record interval. Input signals are connected to a connecting block. The device’s ingress protection is IP 20. Due to its low ingress protection the device is not suitable for using in dusty rooms or rooms exposed to water ingress. The maximum length of the input wires should not exceed 30 m. It is recommended to use shielded cables.
Optional input configurations:
• 2 x counter + 2 x binary input
• 1 x counter + 3 x binary input
• 4 x binary input
 
Technical data
  • Measured value Two-state signal
  • Pulses
  • BINARY INPUT
  • Parameters of the voltage contact „L“ level input voltage:< 0,4 V(*);
  • „H“ level input voltage:> 2 V;
  • Minimum voltage applicable:0 V;
  • Maximum voltage applicable:+30 V DC
  • Parameters of the voltage-free contact Contact resistance in „switched-on“ state:< 10 kOhm;
  • Contact resistance in the „switched-off“ state:> 300 kOhm;
  • Contact voltage in the „switched-off“ state:ca 3 V;
  • Minimum state duration necessary for latching the state:1s
  • COUNTER INPUT
  • Counter parameters Range 24 bits (16 777 215), possibility of letting the counter overflow
  • Maximum pulse frequency configured for voltage input - max. 5kHz
  • configured for a voltage-free or open-collector transistor - max. 200Hz
  • Operating temperature -20 to +60 °C
  • Channels 4x binary input nebo 2x binary input a 2x counter
  • Memory 500,000 values in noncyclic logging mode; 350,000 values in cyclic record mode
  • Recording interval adjustable from 1 s to 24 h
  • Display and alarm refresh adjustable 1 s, 10 s, 1 min
  • Recording mode noncyclic - data logging stops after filling the memory
  • cyclic - after filling memory oldest data is overwritten by new
  • Real time clock year, leap year, month, day, hour, minute, second
  • Power battery SONY LiIon 5200mAh
  • Protection class IP20
  • Dimensions 61 x 93 x 53 mm, with antenna 120 x 93 x 53 mm
  • Weight (including batteries) approx. 270 g
  • Warranty 3 years

Temperature data logger COMET UxxxxM – Catalog Temperature data logger COMET UxxxxM – User‘s Guide


This product was added to our catalog on Monday 04 February, 2019.
Obrázky mají pouze ilustrativní charakter. Při nákupu se řiďte označením produktu.
145 Table './marcomplet_marcompletcz/marcomplet_banners_history' is marked as crashed and should be repaired