REGIN TT-S1 - Slave board for electric heating controllers

REGIN TT-S1 - Slave board for electric heating controllers
If the TTC2000 controller is used to control a larger load than is possible in the basic configuration (16.5 kW), it must be equipped with an adapter - control board TT-S1. For optimal operation, the load connected to the TT-S1 should be the same size as the load connected to the TTC2000. Both loads must be separate. In the event of an increasing heat demand, the triac output from the TTC2000 controller will first increase. If the output of the TTC2000 exceeds 100%, the TT-S1 module activates the relay output and at the same time the triac output of the TTC2000 drops to 0%. If the increasing heat demand persists, the triac output will increase. The TT-S1 module will be disconnected if the output of the TTC2000 drops below 0%. If the TT-S1 module is installed, the TTC2000 detects it and automatically adjusts the control function. No need to change settings. Supply voltage 230VAC, 50-60Hz, output potential-free relay relay, 2A, 250VAC. Time delay 2 minutes for both switches.