J.T.O. System GICO20P-FGD - Carbon monoxide detector 230V
J.T.O. System GICO20P-FGD - Carbon monoxide detector 230V
The detector's task is to send a signal in time about the emergence of potentially hazardous atmospheres for health. For its operation, it uses a heated semiconductor sensor that can react to the presence of a number of other flammable gases or vapors. However, a special sensor control procedure achieves high sensitivity to CO with a reduced influence of other gases.
The detector is a separate unit and its output is a two-state signal showing whether the set concentration is or is not exceeded. The outputs are implemented using relays that are included on the power module board. The relays ensure power-free isolation of the detector output and ensure easy connection to the superior system or controlled action elements (such as valves, fans, beacons, etc.). The detector allows you to connect one external detector for detecting flammable gases (type GC20PN, GC20PK, ...) or carbon monoxide (type GIC40N). When connecting an external detector, its disconnection is monitored according to the standard ČSN EN 60079-29-1 ed. 2. Inside the detector, there is an integrated siren and a 24 V voltage source for switching valves with manual opening.
The electronics board contains control elements that allow you to calibrate the detector when using calibration gas, and a response delay adjustment element for the stage II output.
Stationary electronic device for detecting carbon monoxide (CO)
Part of industrial and commercial applications for detection
Use from small boiler rooms, garages to various warehouses or technological operations where CO may occur
Power supply 230 V~/ 50 Hz
Option to connect an external detector
Power output relays
Integrated siren
Output voltage 24 V for switching emergency valves
Digital calibration
Basic technical parameters:
Power supply 230 V / 50 Hz
Mechanical dimensions 210x149x61 mm
Detected gas: carbon monoxide
Number of detected levels: 2
Applications:
- local indication
- connection to a detection or control system
Main features:
- Power supply: 230 V~/ 50 Hz
- Output voltage: 24 V for switching emergency shut-off valves
- Supply voltage: 230 V / 50 Hz
- Dimensions: 210 x 149 x 61 mm
- Detected gas: carbon monoxide
- Number of detection levels: 2
- Sensor type: heated semiconductor
Why choose GICO20P-FGD:
The GICO20P-FGD combines the documented function, intended applications and technical data of this J.T.O. System product in a clear, structured product description.
Technical specifications:
| Product type | carbon monoxide detector |
| Model | GICO20P-FGD |
| Power supply | 230 V~/ 50 Hz |
| Output voltage | 24 V for switching emergency shut-off valves |
| Supply voltage | 230 V / 50 Hz |
| Dimensions | 210 x 149 x 61 mm |
| Detected gas | carbon monoxide |
| Number of detection levels | 2 |
| Sensor type | heated semiconductor |
| Manufacturer | J.T.O. System |
