Jablotron GD-02K-DIN Universal GSM control on DIN rail

Jablotron GD-02K-DIN Universal GSM control on DIN rail
The product is designed to be mounted on a DIN rail and allows you to control electrical appliances or check their status via a GSM network and a mobile phone. In connection with the GD-02-T temperature sensor, it enables the function of a safety thermometer and the function of a thermostat. When connected to a standard electricity meter, it records and sends daily energy consumption statuses.

The inputs and outputs of the device are safely separated from the power supply and can therefore be connected to other low-voltage devices. The internal battery ensures the operation of the device even in the event of a mains power failure.

Operating modes:

Control
• 2 outputs - power or signal - activates / deactivates the output with the possibility of setting a time pulse (1 s - 24 h).
• Up to 100 phone numbers using SMS or ringing

Status monitoring
• Monitors the status of another device (power failure, faults, etc.) using the input.

Temperature measurement
• Using the JB-TS-PT1000 temperature sensor, it measures the current temperature and reports when the set limit value is exceeded.

Thermostat
• Using the JB-TS-PT1000 temperature sensor, it measures the current temperature, and according to the set temperature (requested or non-freezing), it switches the power output REL1 (e.g. electric boiler, direct heater, etc.). The desired and non-freezing temperature can be set remotely by SMS command and switch between them.

Pulse counter
• Allows you to connect up to two external consumption meters with pulse output (such as electricity meters, gas meters or water meters) or one meter with the distinction of low and high tariff. The pulse counter mode provides SMS information about their current status or exceeding the set levels.

---

JABLOTRON Bezdrátový modul relé UC-82 – návod /cz/