REGMET P10I - wall temperature sensor with ncurrent output 4 to 20mA IP30 range 0 až +35°C

Wall sensors are designed to measure the temperature of ambient air and other gaseous media in a normal indoor environment. The cover and base of the sensor are made of plastic. Standard design. A Pt1000 resistance element is used as the temperature sensor. The sensor leads are connected to a converter that linearly converts the change in resistance of the sensor to a voltage signal. The converter is not equipped with galvanic separation of input and output.

• Pt1000 measuring sensor
• Measurement error <0.6%
• Output signal 4 to 20mA
• Supply voltage 11 ÷ 35 VDC
• Load resistance Rz <(Ucc-11) x 50 [Ω]
• Sensor interruption Iz> 24 mA
• Sensor short circuit Iz <3 mA
• Ambient temperature -30 ÷ 80 ºC
• Relative humidity <80%
• Material ABS, color gray (custom white), RK-x - ABS, color white
• Degree of protection IP 30 (ČSN EN 60529)
• Terminal block P10x - COB 5/2, conductor cross section 0.35 ÷ 1.5 mm2



---

REGMET Interior temperature sensors - output 4 ÷ 20 mA or 0 ÷ 10V type P10x a RK-x – data sheet /en/